The Ford Ranger Prorunner is a conversion package from Automotive Performance Group preps the pickup for some serious work off-road. The company sells all of the parts as a set for $11,573, or the improvement comes with installation for $15,948.
APG supplies wider control arms, extended CV axle shafts, front hub centric wheel rings, and rear wheel adapters with additional lug nuts. The setup doesn’t include wheels, tires, or shocks, but after the improvement, the Ranger can fit tires as large as 35 inches and can support as much as 12.5 inches of suspension travel.
The upgrades include a widebody kit from aerospace-grade carbon fiber that broadens the truck’s fenders by 10 inches (254 millimeters). The lightweight material also replaces the sides of the bed and fuel door. The revised front bumper has an angular look.
As optional extras, customers can add a Warn winch and KC Flex Lights to the front. The rear can get an aluminum bumper that matches the one at the other end. An aluminum roof rack with a light bar and more illumination on the side is available, too.
Save Thousands On A New Ford Ranger
MSRP $ 25,195
MSRP $ 25,195
Save on average over $3,400 off MSRP* with
Motor1.com Car Buying Service
There are persistent rumors and even spy shots of Ford allegedly preparing a Ranger Raptor for the American market that would give buyers a rugged take on the truck straight from showrooms. It would allegedly use a version of the automaker’s 2.7-liter EcoBoost V6 engine that currently offers 325 horsepower (242 kilowatts) and 400 pound-feet (542 Newton-meters) of torque in the F-150.
However, a recent report indicates that the next-gen Ranger arrives in 2022. If this is true, then Ford doesn’t have much time left to introduce the meaner version.
THE 2020 FORD RANGER PRORUNNER DESIGNED & BUILT BY APG
The APG PRORUNNER conversion package brings real off-road performance and styling to the Ford
Ranger with a combination of aesthetic and performance upgrades. A true carbon fiber wide body made of 100% aerospace grade carbon fiber adds 10-inches of width to the truck and allows for fitment of up to 35-inch tires and up to 12.5-inches of suspension travel. The PRORUNNER Series 1 package long-travel suspension system includes wider upper and lower control arms, a tie rod extension kit, extended CV axle shafts, front hub centric wheel rings and rear wheel adapters with additional lug nuts, all designed and manufactured by APG. The PRORUNNER Series 1 package does not include wheels, tires or shocks allowing owners to choose based on their personal preference. All of our body panels and components are designed and manufactured in California.
ENGINEERED FOR MAXIMUM OFF-ROAD PERFORMANCE, WITHOUT SACRIFICING ON-ROAD DRIVABILITY.
APG PRORUNNER SERIES 1 (4WD)
STARTING KIT PRICE: $ $11,573
PRICE WITH INSTALLATION: $15,948
*DOES NOT INCLUDE WHEELS/TIRES & INSTALLATION* *DOES NOT INCLUDE WHEELS/TIRES*
SERIES 1 INCLUDES *CONTACT OUR SALES TEAM FOR CUSTOMIZATION OPTIONS
- DRIVER & PASSENGER SIDE APG FULL CARBON FIBER REPLACEMENT FRONT FENDERS
- DRIVER & PASSENGER SIDE APG FULL CARBON FIBER REPLACEMENT BEDSIDES
- APG CARBON FIBER REPLACEMENT GAS DOOR WITH FUEL NECK EXTENSION KIT
- APG ALL ALUMINUM FRONT WINCH CAPABLE BUMPER WITH PARKING SENSOR CUTOUTS,
- OEM FOG LIGHT BRACKETS, & STEEL D-RING PASS THROUGH MOUNTS (COMES POWDER COATED)
- FRONT BUMPER WINCH & LIGHT “CLOSEOUT” BRACKETS
- APG DRIVER & PASSENGER SIDE TIE ROD EXTENTION KIT
- APG REAR WHEEL ADAPTERS WITH ADDITIONAL LUG NUTS
- APG UPPER & LOWER CONTROL ARMS (COMES POWDER COATED)
- EXTENDED LENGTH APG FRONT AXLE SHAFTS
- APG FRONT HUB CENTRIC WHEEL RINGS
- APG FRONT OEM COIL OVER SPACERS
ADDITIONAL AVAILABLE ACCESSORIES
- APG REAR ALUMINIUM BUMPER WITH D-RINGS (PARKING SENSORS AND TOW CONNECTIONS RETAINED)
- WARN 8000S WINCH INTEGRATED IN FRONT BUMPER
- FACTOR55 PROLINK
- FACTOR55 FAIRLEAD
- FRONT BUMPER INTEGRATED KC FLEX LIGHTS
- REAR BUMPER INTEGRATED KC FLEX LIGHTS
- KC-HILITE ALUMINUM ROOFRACK WITH M-SERIES 50” LIGHT BAR AND SIDE LIGHTS
- SPOD BANTAM LIGHT CONTROLLER